Viconics VT7000 Series PIR Application Guide Manual de usuario Pagina 1

1PIR Application Guide for the for VT76xxX5x00(X) Series thermostats ( Issue Date: October 21, 2008 – 028-6016 R0 ) Product Overview The VI-PIR

10 Typical Detection Pattern for VI-PIR Lens Installation Tips Tip Type Area Of Interest Explanation PIR Connector Po

11VI-PIR Cover Installation • Remove security screw on the bottom of the current thermostat cover. • Open up by pulling on the bottom side of t

2Configuration Parameters Associated with the Viconics PIR Accessory Covers The following configuration parameter is specifically provided as

3 • Setpoints: The implemented occupied and unoccupied heating and cooling setpoints are under the same limitations and restrictions. This means th

4 • Network Priority and Local Occupancy Routine: The internal PIR occupancy logic implementation in conjunction with network commands has been c

5 1) BACnet Object Used for Occupancy Commands and Feedback Object Name Object ID BACnet Index Text 1 Local Occupancy ( PIR or Internal Schedule

6• Initial State, PIR Occupancy Routine: The initial effective occupancy state on power-up with either a PIR cover is present: o In stand-alone app

7Typical Applications • VT760x Stand-alone application using 2 levels of occupancy with a VI-PIR accessory cover Non-Scheduling models Set-

8• VT765x Stand-alone application using 2 levels of occupancy with a VI-PIR accessory cover Scheduling models Set-up and Configuration Thermostat

9• VT760x Networked application using 2 levels of occupancy with a VI-PIR accessory cover Non-Scheduling models Set-up and Configuration Thermost