Viconics VWA5000 (Classic ZigBee) Installation Guide Manual de usuario

1 | VWA 5000 Series-Installation Guide CONTENTS Installation 2 Self Testing 2 Location 3 Operation Overview 4 Model Chart 5 Pairing Pro

10 | VWA 5000 Series-Installation Guide IMPORTANT NOTES BEFORE STARTING PAIRING PROCEDURE  Verify that the following parameters on the VTR7300 con

11 | VWA 5000 Series-Installation Guide STEPS TO ASSOCIATE SWITCHES WITH CONTROLLERS 1) Pull off the pull tab from the battery holder to power the

12 | VWA 5000 Series-Installation Guide MULTIPLE SWITCH CONFIGURATION In a multiple switch configuration, up to 20 switches can be linked to one cont

13 | VWA 5000 Series-Installation Guide STATUS & MONITORING  Once the switch is commissioned, it can be monitored by the status LED when diagno

14 | VWA 5000 Series-Installation Guide BATTERY STATUS To verify the battery strength of the wireless switch, simply jump the switch for 4+ seconds a

15 | VWA 5000 Series-Installation Guide SPECIFICATIONS Power requirements: 3.0 VDC 2 x AAA batteries. Factory supplied Operating conditions: 0 °C to

16 | VWA 5000 Series-Installation Guide DRAWING & DIMENSIONS Switch & Switch Base Dimensions Magnet & Magnet Base Dimensions

17 | VWA 5000 Series-Installation Guide MOUNTING TEMPLATES NOTE: The magnet is to be placed on the opposite side of t

18 | VWA 5000 Series-Installation Guide NOTE: The magnet is to be placed on the opposite side of the security scr

2 | VWA 5000 Series-Installation Guide INSTALLATION  Remove cover by pulling on the side where the security screw was mounted (Fig. 1).  Remov

3 | VWA 5000 Series-Installation Guide LOCATION

4 | VWA 5000 Series-Installation Guide OPERATION OVERVIEW The VWA5000W series Zigbee™ wireless switches are used in conjunction with the

5 | VWA 5000 Series-Installation Guide MODEL CHART VICONICS PART NUMBER VWA5000W5000W VWA5000D5000W Complete with magnet, batteries and required moun

6 | VWA 5000 Series-Installation Guide Fig.5 – Magnet Components and Proper Magnet Orientation PAIRING PROCESS PROCEDURE NOTE: (See

7 | VWA 5000 Series-Installation Guide USING THE VTR7300 CONTROLLERS FOR STAND-ALONE SYSTEMS When PAN ID is used with a range of 501 to 1000, for St

8 | VWA 5000 Series-Installation Guide Typical floor plan of a unique network for Stand-Alone systems with VTR7300 Controllers:

9 | VWA 5000 Series-Installation Guide USING THE VTR7300 CONTROLLERS FOR NETWORKED SYSTEMS When PAN ID is used with a range of 1 to 500, for Network