Viconics VWA5000 (Classic ZigBee) Installation Guide Manual de usuario Pagina 5

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 18
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 4
5 | VWA 5000 Series-Installation Guide
MODEL CHART
VICONICS PART NUMBER
VWA5000D5000W
Complete with magnet,
batteries and required
mounting hardware
Wireless Door Switch
To verify if the device is a wireless window switch or wireless door switch:
- Power cycle the switch (remove battery for 60 seconds and then insert again) and verify
the LED blinking pattern to confirm if it is a window switch or door switch or simply read
the label located on the electronic board.
# of blinks
Part Number
2 blinks
Window Switch (VWA5000W5000W)
3 blinks
Door Switch (VWA5000D5000W)
WARNING: Respect polarity when replacing batteries. Failure to do so may
damage the switch. The “+” and “-terminals are illustrated on the board.
Remove pull tab to power up the switch.
Fig.4 Wireless Switch Components
NOTE: The magnet is located on the opposite side of the security screw.
(Opposite side of the batteries).
Hidden Switch
LED (switch side)
Pull Tab
Vista de pagina 4
1 2 3 4 5 6 7 8 9 10 ... 17 18

Comentarios a estos manuales

Sin comentarios