Viconics VT8600 User Interface Guide Manual de usuario descargar pdf (Pagina 24)

VT8600 SeriesUser Interface Guide

Viconics Technologies Inc. 9245 Langelier Blvd. Saint-Leonard, Quebec, Canada, H1P 3K9 I +1 514 321 5660

028-0441-00 www.viconics.com November 2014

6/9 Configuration

Discharge HL

Cool lock

Heat lock

49.0 °C

FA range

Reheat lockout

Discharge LL

-40.0 °C

49 °C

7 °C

0 °C

0 l/s

CONFIGURATION PARAMETERS SCREEN 6/9

PARAMETER DETAILS SCREEN 6/9

Conﬁguration Parameters Default Value Signiﬁcance and Adjustments

Heat lock

Outside air temperature heating lockout

Default value: 120 °F (49 °C)

Disables heating stage operation based on outdoor air temperature.

Function will only be enabled if OS (outside air temperature sensor)

is connected.

From -15 °F up to 120 °F (-26 °C up to 49 °C)

Cool lock

Outside air temperature mechanical cooling lockout.

Default value: -40 °F (-40 °C)

Disables cooling stage operation based on outdoor air temperature.

On economizer model, free cooling will not be disabled by this

function.

Function will only be enabled if OS (outside air temperature sensor)

is connected.

From -40 °F up to 95 °F ( -40 °C up to 35 °C )

Discharge HL

Discharge air temperature high limit

Default value: 120 °F (49 °C)

Discharge air high temperature value at which the heating stages will

be locked out.

70°F to 150°F (21°C to 65°C)

(increments: 0.5° or 5°)

Dis LL

Discharge air temperature low limit

Default value: 45°F (7 °C)

Discharge air low temperature value at which the cooling stages will

be locked out.

35 to 65°F (2.0°C to 19.0°C)

(increments: 0.5° or 5°)

SH lock

Only valid if HT Type is set to Analog

Outside air temperature supply heat lockout

Default value = 32 °F (0 °C)

Disables heating operation based on outdoor air temperature.

From –15 °F up to 120 °F (-26 °C up to 49 °C)

(increments: 5° or 50°)

FA Range

FA range upper limit value

Default value: 0 CFM

Sets the upper limit of the CFM range. This parameter should be set

based on the rooftop unit size. If set to 0 CFM, the fresh air damper

control will be based on the Min/Max CO2 and Min/Max Pos values.

See Damper Position section for more details.

0 to 20 000 CFM (0 to 9438 L/s), 10 or 100 increments

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 46 47

Comentarios a estos manuales

Sin comentarios

Viconics VT8600 User Interface Guide Manual de usuario Pagina 24

Comentarios a estos manuales

Relacionado con productos y manuales para Para Casa Viconics VT8600 User Interface Guide